Used watchmakers lathe

United Kingdom
  • United Kingdom
+ 2500mi+ 5000mi+ 10000mi
Change location
099+
United Kingdom - 1 week ago on ebay.co.uk
Watchmakers Lathe cross slide lorch Schmidt lathe compound slide boley bergeon this fits most watchmakers lathes with the D on the side stamped lorch but fits other lathes .It has some plateing wear see pictures also it has no no tool post lathe tools ??? Used Plenty photo’s so take a look See all photo’s beware all lots ...
Watchmakers Lathe cross slide lorch Schmidt lathe compound ...

watchmakers lathe

:

watchmakers lathes

099+
Southwold IP18, United Kingdom - 1 week ago on ebay.co.uk
This is a Wood Screw Chuck used with my Lorch kd50 8mm Lathe. It is useful for turning wooden parts such as laps. Overseas bidders, please note that Royal Mail International Standard service offered is not tracked nor has Signed Delivery and therefore Ebay Buyer Protection may not apply. It does carry £20 Compensation. Royal Mail Tracked and Signed ...
wood screw chuck for 8mm watchmakers lathe
099+
United Kingdom - 4 weeks ago on ebay.co.uk
Watchmakers Lathe Head stock & face plate with dogs Wolf Jahn fits lorch boley and other lathes with the D on the side ???? make your own mind up if these are any use to You These are a nice spare to have ready when needed # for repair parts see pictures see ruler for sizes Real useful spare to have standing ...
Watchmakers Lathe Head stock & face plate with dogs Wolf ...
099+
Pinner HA5, United Kingdom - 1 week ago on ebay.co.uk
Here we have a Watchmakers Lathe Compound Crosslide with no makers mark but believed to be manufactured by B.T.M during ww2. It had been in storage for about 20 years before I acquired it in a job lot of watchmakers’ kit, (see my other auctions). I lightly cleaned it and re-oiled it to make sure all ...
Watchmakers Lathe Compound Crosslide

watchmakers lathe

:

boley lathe

099+
Rowley Regis B65, United Kingdom - 2 weeks ago on ebay.co.uk
Here we have 8 x various cutting tools or may be for a watchmakers lathe . Picture one shows all included in the auction, other pictures are close ups of picture one. Please see other items for sale as there may be bits in there that are relevant to these or may have got mixed up as I have no ...
watchmakers tools - 8 x cutting tools - lathe tools # 121

watchmakers lathe

:

watch lathe uk

099+
Droitwich WR9, United Kingdom - 4 weeks ago on ebay.co.uk
Nice old tool Fits in tailstock I used a Pultra lathe. It's a standard size, will fit any 8mm lathe 40 years "at the bench" loved it,just like playing in the shed,+ they paid you. It's your turn now, Will be well packaged for the post. See my other items all sorts of interesting stuff. Will ...
Pivot drill jacot tool for 8mm watchmakers lathe watch ...
099+
Dorset DOR, United Kingdom - 4 weeks ago on ebay.co.uk
...Click Images to Enlarge You are bidding on a nice example of a vintage Watchmakers Lathe by boley of Germany in very good clean used condition. Serial No: 13763 Beautifully made item in fully operating condition. 30cm overall. The photos tell the story; has an indexing head as shown; drawbar and colleted drill chuck; all parts operate as they should. ...
Vintage Super Small Watchmakers Lathe by boley Old Tool

watchmakers lathe

:

vintage watchmakers tools

099+
Broadmayne DT2, United Kingdom - 2 weeks ago on ebay.co.uk
...Drills etc Old Tool Click Images to Enlarge You are bidding on a vintage Watchmakers Brass & Steel Hand Lathe Arbor Drill Tools etc as shown in good clean used condition. Not sure of exact use and function but clearly very well made precision tools for hand held working of parts. These are free uk postage but will not be in ...
Vintage Asstd Watchmakers Brass & Steel Hand Lathe Arbors ...
099+
Southwold IP18, United Kingdom - 6 days ago on ebay.co.uk
This is a group of Ten Crown Chucks used with my Lorch kd50 8mm Lathe. Nine of them are marked "Lorch" and have these bores :- 8.0mm, 8.8mm, 9.5mm,11.2mm, 12.0mm,14.4mm, 16.0mm and 18mm. The final item is marked "Boley & Leinen" but no size marking. However, on measurement, it appears to be ...
group of ten crown chucks for 8mm watchmakers lathe
099+
Southwold IP18, United Kingdom - 1 week ago on ebay.co.uk
...is a Levin Double Tool Lever Cross Slide used with my Lorch kd50 8mm Lathe but should fit any lathe with a 50mm centre height and a ww style bed. ...Both slides have adjustable stops. It does not have a nut for clamping to the lathe bed as I used the one off the regular slide rest. This is a ...
levin double tool cross slide for ww pattern watchmakers  ...
099+
Tiverton EX16, United Kingdom - 1 week ago on ebay.co.uk
Watchmakers lathe Centre Press, Tail Stock, with Jacobs 3 jaw 1ba 3/8-24 thdin good working order.Slight wear to the finish.
Vintage Watchmakers lathe Tail stock, Drill Press, 3 Jaw ...
099+
Southwold IP18, United Kingdom - 1 week ago on ebay.co.uk
...This is a set of Five Miniature Step Chucks used with my Lorch kd50 8mm Lathe. Each chuck has four steps. They are marked "Starrett". The display board is not included in the Auction. Overseas bidders, please note that Royal Mail International Standard service offered is not tracked nor has Signed Delivery and therefore Ebay Buyer Protection may not apply. ...
set of five starrett miniature step chucks for 8mm  ...
099+
West Sussex WSX, United Kingdom - 1 week ago on ebay.co.uk
Set 5 Step Chuck Collets for Watchmakers Lathe - 6.5mmnumbered 1 - 5. uk shipping £6 tracked royal mail. Overseas please ask for a quote.Please see my other listings of watchmakers tools and lathe parts.
Set 5 Step Chuck Collets for Watchmakers Lathe - 6.5mm
099+
Gordon IM5, United Kingdom - 1 week ago on ebay.co.uk
...are a full set (marked 1 to 5) step collets that will fit 8mm watchmaker's lathes. The collets are all in excellent condition and fit perfectly within my Boley headstock and drawbar. There is no corrosion or pitting on any of the faces. They are from different manufacturers but at least three are marked Pultra Conflex. Will post worldwide ...
Full Set of 8mm Watchmakers Lathe Step Collets
099+
Gordon IM5, United Kingdom - 1 week ago on ebay.co.uk
For sale are 15 off Schaublin 8mm watchmakers lathe collets. The condition of all of them is very good with no pitting or corrosion on any faces. All fit on my Boley lathe and drawbar without any problems. The markings are clear on all the collets and are sized as (in mm The photos show the condition with the '...
Schaublin 8mm Watchmakers Lathe Collets
Follow this search and create an email alert for Watchmakers lathe
  • Relevance
  • Popularity
  • Date
  • Price
• Enter postcode for location Enter postcode for location
• Price
Choose
• DateChoose
Additional options
Message too long
Post
 –   + 
Share, sell and chat with your neighbours.
Google Google
ON AIR
Me
Chat:
My chat status:
Available
Do not disturb
Show in my chat list:
Most popular
All contacts
My options:
Show online users first
Hide offline users
Small chat list
Medium chat list
Large chat list
Enable audio notifications
Enable desktop notifications
Enable video-chat (Beta version)
Enable my local Web TV (Beta version)
Invite a friend