Used used metal lathe sale

United Kingdom
  • United Kingdom
+ 2500mi+ 5000mi+ 10000mi
Change location
099+
Witham CM8, United Kingdom - 1 month ago on ebay.co.uk
...motor still has the old fashion round plug on so this has not been used in some time?I'm sure the lathe is complete but I really have no idea, the stand is cast iron and heavy so I am offering this item for "needing attention"collection only and I will not post, collection is from witham in Essex....
myford lathe,metal lathe,1930 s? with stand
099+
Bedfordshire BDF, United Kingdom - 2 weeks ago on ebay.co.uk
Here for sale is my husbands lathe. This has been hardly used, probably a handful of times amounting to about 15 hours total running time. It was bought to use for a project of his, which unfortunately he no longer has the time to pursue. It is was bought in 2012 for £3000 and is in good working order. ...
Axminster sieg cq6230B/910 Metal Turning Lathe.

used metal lathe sale

:

used metal working lathe

099+
Mansfield, United Kingdom - 2 weeks ago on ebay.co.uk
Warco Metal Turning and Screw Cutting Lathe Imperial/Metric Please see Warco site for full specifications In Excellent condition, cost £1300.00. Only been used for model engineering for ...Cabinet stand, Chucks and all equipment supplied with it from new, some unused Reason for sale, moving home and cannot accommodate it there. Can deliver on a small trailer within ...
Warco Metal Turning Lathe 250 V - F
099+
Liverpool L6, United Kingdom - 2 weeks ago on ebay.co.uk
Metal Lathe 30" long in really good condition. I've only used it for making fishing float bodies so it's only had very light use. Mostly balsa and a very small amount of wood. Collection only from Liverpool 5. Low start with no reserve. Grab a bargain. I reserve the right to end at anytime as its advertised ...
Metal / Model making lathe

used metal lathe sale

:

small wood lathes sale

099+
Stevenage, United Kingdom - 1 month ago on ebay.co.uk
This is a Jacobs 18N Super Chuck 1/8" to 3/4" inch capacity. This is the ball bearing type which provides much stronger gripping power, and has hardened ...rotating smoothly. There are some slight marks on the back of the chuck. Ideal for lathe metalworking. Could also be used in a pillar drill. It is supplied with a ... ...
Jacobs 18N Ball Bearing Super Chuck 1/8
099+
Bury St Edmunds SFK, United Kingdom - 2 weeks ago on ebay.co.uk
4 X lathe metal cutters..1 x M165 tipped 5/8" square 1 x T3 5/8" tipped all used
4 X lathe metal cutters..1 x M165 tipped 5/8
099+
Dunmow CM6, United Kingdom - 1 month ago on ebay.co.uk
Selling on behalf of a late family member, a nutool ntl400p metal turning lathe, runs on standard single phase socket, tested today and jumps straight into life, Do not ...will try to answer any questions. The plastic on/ off knob is broken but the metal shaft it sat on is fine and turns on and off perfectly well see ...
Nu tool Metal Lathe ntl400P Bench Mountable
099+
Bury St Edmunds SFK, United Kingdom - 1 month ago on ebay.co.uk
4 X lathe metal cutters..1 x bocarisa 1/2 x 1/2..1 x usa Speed cutter 1/2 x 1/21 x md -May Cobalt 1/2 x 1/2 sk ... Rad 10A201 X 1/2 X 1/2all used
4 X lathe metal cutters..1 x bocarisa 1/2 x 1/2..1 x usa ...
099+
Guildford, United Kingdom - 1 month ago on ebay.co.uk
...and brown model 1 in perfect working order with no signs of ever being used in production, it was owned by the mod, as a training lathe. I have given ...4 jaw chuck and a face plate. Viewing is highly recommended. For more information go to www.lathes.co.uk. This is the rolls Royce of lathes. (Loads better than ... ...
metal lathe

used metal lathe sale

:

smart brown lathe

099+
Corby, United Kingdom - 1 month ago on ebay.co.uk
Clarke metalwork lathe Ideal for hobby work or home use. Only used a few times Comes with a selection of useful tools Cash on collection please No refunds or returns Any questions please ask Viewing welcome
Clarke 300mm Metal Lathe - Nearly New
099+
Alford BA7, United Kingdom - 3 weeks ago on ebay.co.uk
Small lathe ideal for model makeing in a good used condition all works as it should the makers plate is in the photos take a look the stand its ...up to much room .am selling this for a friend who bought it and never used it cash on collection from skegness it is a heavy item thanks for looking ...
Small metal working lathe ideal for model making
099+
Peterborough, United Kingdom - 1 month ago on ebay.co.uk
...tools old lathe without tail stock 38 inches long .A tail stock which could be used on the lathe with a little work ..indexing table for milling or drilling machine never used .Brand new 1 mm to 13 mm chuck with key .I have never used the tools but have run the lathe which spins around okay so the motor ...
small metal working lathe and other machine tools

used metal lathe sale

:

lathe machine

,

small lathes

099+
East Dean BN20, United Kingdom - 2 weeks ago on ebay.co.uk
Here for auction is a Pratt Burnerd 3 jaw chuck for a lathe. Main body measures 100mm diameter and 48mm depth. Opening is 25mm. Chuck has been used but ...in good condition with the mechanism moving freely. There are some marks expected with a used machine part but nothing that stands out as being an issue. International postage is ...
Vintage pratt burnerd 3 Jaw Lathe Chuck Old Machine Tool ...

used metal lathe sale

:

machine tool auction uk

099+
Swindon, United Kingdom - 1 day ago on ebay.co.uk
This auction is for a myford ml7 metal lathe on cabinetcomes in a used conditionno damage to the gears or bullwheelsthe motor is 240 volt fitted with a 3 pin plug ready to runno damage at all on the lathe at all does also come with some tooling (not shown but is supplied)does have age related paint lossany ...
myford ml7 metal lathe on cabinet
099+
Maidstone, United Kingdom - 18 hours ago on ebay.co.uk
...a short while ago direct from a bankrupt fabrication company. Machine was still being used in service when removed although was apparently only used on rare occasions for general odd ...
Colchester Triumph 2000 ss&sc 15x50 Gap Bed Metal Turning  ...
Follow this search and create an email alert for Used metal lathe sale
  • Relevance
  • Popularity
  • Date
  • Price
• Enter postcode for location Enter postcode for location
• Price
Choose
• DateChoose
Additional options
Message too long
Post
 –   + 
Share, sell and chat with your neighbours.
Google Google
ON AIR
Me
Chat:
My chat status:
Available
Do not disturb
Show in my chat list:
Most popular
All contacts
My options:
Show online users first
Hide offline users
Small chat list
Medium chat list
Large chat list
Enable audio notifications
Enable desktop notifications
Enable video-chat (Beta version)
Enable my local Web TV (Beta version)
Invite a friend