Used used lathes

United Kingdom
  • United Kingdom
+ 2500mi+ 5000mi+ 10000mi
Change location
099+
Loughton MK5, United Kingdom - 2 weeks ago on ebay.co.uk
This is a Churchill Redman Cub Metal Lathe This lathe has not been used for many years Was wired with a 13 amp switch so needs complete re-wiring ...12 inch faceplate, 3 jaw and 4 jaw chuck, steady, box of gears and the lathe stand & drip tray (see photos) The bed length is 44 inches, width is 7 ...
Churchill Redman Cub Lathe (Lathes, Mills, Drills ...

used lathes

:

metal lathes

099+
York, United Kingdom - 2 weeks ago on ebay.co.uk
I have for sale two Axminster hobby lathes the ah 1218 has the extension bed the white one needs a new motor could be used as spares you can arrange your own courier service to collect after payment both very clean only cosmetic marks remember white has no motor
2 axminster wood lathes white one and redone for sale

used lathes

:

wood lathes

099+
Loughton MK5, United Kingdom - 4 weeks ago on ebay.co.uk
Axminster Wood Lathe aptc M330 Comes with attachments This item has hardly been used. There is a little surface rust please note: This is cash on collection - In person no paypal Item must be picked up within 1 week unless we are notified of any problems All items are second hand unless stated otherwise so consider this when bidding. ...
Axminster Wood Lathe (Lathes, Mills, Drills, Workshop)
099+
Mytholmroyd HX7, United Kingdom - 1 week ago on ebay.co.uk
...genuine 3 point fixed steady for series 7 myford lathes this listing is for A used 3 point fixed steady for any myford series 7 lathe.it can hold up to 2" diameter bar, and clamps directly on to the lathe bed.although it has been used, it is still in excellent condition.it has been painted blue by the ...
used genuine 3 point fixed steady for series 7 myford lathes
099+
Fermanagh FER, United Kingdom - 1 month ago on ebay.co.uk
50mm en8 Bright Round bargrade is better than Bright Mild and is still weldable with mild steel rods.Weights 28mm - 412g41mm - 605gvat Invoice will be supplied.Have other sizes of en8 and Bright Mild Steel.Next Day Delivery on applies to items purchased before 1.30pm.
50mm en8 Bright Round Bar used on Myford, Colchester ...
099+
Mytholmroyd HX7, United Kingdom - 2 weeks ago on ebay.co.uk
Used collet chuck for cowell lathes with collet M14 x 1.5 this is A collet chuck to suit cowell lathes that came as part of A workshop clearance....collet chuck (and nose), 2 tommy bars and one collet (3mm).these items have been used, and have accumulated some surface rust (see picture).the collet chuck is threaded M14 ...
used collet chuck for cowell lathes with collet M14 x 1.5 ...
099+
Mytholmroyd HX7, United Kingdom - 2 weeks ago on ebay.co.uk
...3 point fixed steady for cowell lathes this is A fixed 3 point steady, used on cowell lathes.it has been used, but is in excellent condition.the only sign of wear is the surface rust present on the square washer at the bottom.the bronze fingers are showing no signs of wear, and meet up perfectly at the centre....
used 3 point fixed steady for cowell lathes Direct From ...
099+
Mytholmroyd HX7, United Kingdom - 1 month ago on ebay.co.uk
Bison quick change holders Auction for a set used Bison quick change holders Set includes 2 standard quick change holders1 vee quick change holder1 parting holder with hss blade included Holders are Myford size so will fit a Myford quick change toolpostholders are in very good conditioncame from a workshop clearance Direct from Myford ltdplease note that postage to ...
Used Bison quick change holders Vee parting for Myford  ...
099+
Mytholmroyd HX7, United Kingdom - 6 days ago on ebay.co.uk
...myford rear toolpost for ml7 / super 7 lathes this is A rear toolpost, to be used on any myford series 7 lathe. there are A couple of paint chips, but other than that, it is in good condition and full working order. comes as pictured. Direct from Myford ltd - auction from 99p!! For any other information or card payment, please ...
used myford rear toolpost for ml7 / super 7 lathes Direct ...
099+
Swindon, United Kingdom - 1 day ago on ebay.co.uk
This auction is for Dickson tool holder for 1mt drills or chuck suit boxford lathes or simular comes in a used condition any questions please do askthanks for looking
Dickson tool holder for 1mt drills or chuck suit boxford  ...
099+
Devon Consuls PL19, United Kingdom - 1 week ago on ebay.co.uk
...narrow body with recessed thread for less overhangfor use with ml7 and super 7 Lathes mounting thread is 1 1/8" x 12 tpi in good used condition Postage for the following locations may vary;uk Highlands, Islands and Northern Ireland and Southern irelandso please check with me first. we are happy to post internationally please ask for prices the ...
burnerd 6
099+
Mount Batten PL9, United Kingdom - 1 week ago on ebay.co.uk
...Comes with chuck key this will fit Myford ml7 , ml7-R , Super 7 + ml10 lathes In used condition. we are happy to post internationally please ask for prices The item you see in the photo is the actual item you will receive.I endeavour to list and photograph the majority of my items individuallyand have many more myford spares & parts ...
genuine burnerd 3 Jaw - 4
099+
Northwich CW8, United Kingdom - 1 week ago on ebay.co.uk
You are bidding on a genuine Sheffield Moore & Wright adjustable scribing block, little used in nice clean condition. Use on the surface plate or round stock for marking out ...stem adjustable, plus 6" scriber. This came with other accessories included with a Myford ml7 lathe. Quite a heavy set.. I will despatch using an insured courier "signed for". Please ...
Moore & Wright , Sheffield, England,scribing block lathes ...
099+
Devon Consuls PL19, United Kingdom - 2 days ago on ebay.co.uk
...1/8" x 12 tpi this will fit Myford ml7 , ml7-R + Super 7 lathes In used condition Postage for the following locations may vary;uk Highlands, Islands and Northern Ireland and Southern irelandso please check with me first. we are happy to post internationally please ask for prices The item you see in the photo is the actual item ...
genuine burnerd 5
099+
United Kingdom - 2 weeks ago on ebay.co.uk
...sale is an original indexing and dividing attachment for the Emco unimat 3 or 4 lathes.The attachment is complete and comes with its original Emco box together a 24 hole indexing plate and with screws and brackets for attaching. The attachment has not been used and so it is in mint condition.It has a 14mm by 1mm exterior ...
mint& boxed indexing & dividing attachment for unimat 3 or ...
Follow this search and create an email alert for Used lathes
  • Relevance
  • Popularity
  • Date
  • Price
• Enter postcode for location Enter postcode for location
• Price
Choose
• DateChoose
Additional options
Message too long
Post
 –   + 
Share, sell and chat with your neighbours.
Google Google
ON AIR
Me
Chat:
My chat status:
Available
Do not disturb
Show in my chat list:
Most popular
All contacts
My options:
Show online users first
Hide offline users
Small chat list
Medium chat list
Large chat list
Enable audio notifications
Enable desktop notifications
Enable video-chat (Beta version)
Enable my local Web TV (Beta version)
Invite a friend