Newman elf electric motor 230/250 V 2.4 A 1425 rpm makers plate states 1/4 hp but these old motors were much more powerfull works out at 576 watts which on A modern motor would be about 2/3 hp shaft is 1/2" diameter isolated foot mount 99p start price with no reserve grab A bargain

Here we have a 3/4 hp (5.5 kw) 3 phase electric motor.It is connected to a single phase to 3 phase converter.This gives forward reverse ...Myford the guy that purchased it could not afford the motor and controller.So he bought thne lathe less motor.The motor and controller have had very little use possibly ... ...

Steel Pulley is a 2 step, A section, 1/2" wide at top of V. It is 3/4" bore with a 1/4" grub screw. Diameters are 2- 3/4" and 3- 1/2". Some surface rust, otherwise O.K. Paypal please + £3.71 postage R.M. First packet up to 1 kg.

...chuck by cutting out electric motor when micro switch is activated. Removed from my own Boxford aud 4.5 inch lathe. This arrangement was listed as an optional extra from the manufacturer when new. May fit other makes of lathes or other sizes of lathes. Please contact me if more details etc are required. Postage at cost, I add nothing ...

...to look at this .item if your looking for a good lathe buy a boxford.???? If you want a great lathe buy this Boxford.?? you will not be disapointed. I ...intended to do several projects but only done one and lost interest.the lathe has done very little work. was 3 phase when brought but i fitted a 240v motor ...

A old boxford lathe, been in shed for years don,t know if working, has electric motor which turns by hand, also extra 3 chucks, 2, 3 claw and 1, 4 claw, also original users manual. these are all rusty but with bit oil should free,

...New Page 1 Boxford Model C U D Modellers Lathe Here is my totally refurbished Boxford Lathe. It comes with a Boxford original stand with top tray. It is fitted with a new 240v single phase motor that has been totally rewired. It has forward and reverse gearing and 6 change gears although I have never used them as when ...

Here we have my ixl or boxford lathe i think it is an ixl but looks simuler to a boxford i use to have, please feel free to ask ...on x and y ,leadscrew on carrage and top slides appear in good condition,as do bedways,it has not got a motor with it but a 1/2 to ... ...

Boxford Lathe tud i am selling my lathe complete with a new chuck and plate. new tooling and assorted old bits drill chuck (in photo) life steady for tail stock and assorted bits and bobs.. the bad news is the motor as just gone pop.so you need a new one..you can pick then up quite cheep. i ...

Boxford little giant, toolpost grinder attachment. comes in original box with various attachments. this was last used on A colchester mascot lathe and was fully working, it was then ...apart to diagnose the problem, I believe the blue elctrical thingy has expired and will need replacing (I think this is what controls the current to the motor. I have ... ...