Boxford metal lathe 4.5" model A screwcutting gearbox (imperial) .. Business seller information Bede Tools and Machinery

Boxford Model A lathe (1940's), good working order from renowned manufacturer. This lathe has all attachments that would be expected for model making and engineering, including a thread ...Despite the location being listed as in Cornwall it is in fact in barnstaple, North Devon Due to the weight the lathe must be collected. Viewing is welcome by arrangement ...

Parting tool blade Myford Boxford Emco Unimat Colchester Lathe model enginnering Small Parting tool blade ( see photo ) Measures about 4 inches along the top 0.5 deep and 0.130 inches across the top and 0.085inches on the bottom I have measured the tool along the top excluding the reground end the total length is about 4.8 ...

Boxford Lathe with some tooling Ideal for Model Maker/ Hobbiest From a College 18" between centres (4" centre height) Comes complete with: 4" Self Centre 3 Jaw Chuck, Internal & External Jaws 5" Drive plate and 2x drive dog 4" Self Centre 4 Jaw 6" Independent 4 Jaw 7 3/8" Face Plate Taper Turning Attachment Sadle Stop 2x 2Point ...

Boxford Lathe with some tooling From a College Ideal for a model maker / Hobbiest Set up with Collets at moment With 19 Collets 18" between Centre (4" Centre Height) Comes with: 4" Self centre 3 Jaw Chuck 5" Drive plate with drive dog 6" Independent 4 Jaw 7 3/8" Face Plate 1x 2 point steady 1x 3 point ...

Boxford lathe drawbar & collet set,was used on a model A lathe...Collet sizes Please take a look at other listed Boxford Items...

Boxford Model 1 B Lathe Single Phase, Fully good working order there is a slight mark on the bed which in no way affects its running. 44inch Long, 18inch deep. height 48inch Cross feed + Longitude feeds, screw cutting metric dials, metric threads and power feeds. Also included in the sale 4 jaw chuck drill, Chuck + Key Tap wrench, + 5 ...

Boxford lathe model A, metric thread cutting chart & decal also a reversing switch and plate,the switch has not been tested Please take a look at other listed Boxford Items...

Boxford metal lathe 3 phase coolant pump with on/off switch and coolant pipe + tap type no P17D2 coolant pump 2850 rpm removed from A model A boxford lathe ..

Boxford lathe all good condition had new headstock bearings and cross slide nut and screw. This machine is a bud model serial no 12236 (Sept 62) and consequently has power on both traverse and cross slides. It also has suds tank and pump enclosed in its cabinet. Comes with a three and four jaw chuck and a full set ...